Consolidated Statutes and Regulations
Consolidated Statutes
Consolidated Regulations
Annual Statutes and Regulations
Annual Statutes
Annual Regulations
Additional information
Québec Official Publisher
What’s new?
Information note
Policy of the Minister of Justice
Laws: Amendments
Laws: Provisions not in force
Laws: Provisions brought into force
Annual Statutes: PDF versions since 1996
Regulations: Amendments
Annual Regulations: PDF versions since 1996
Court Decisions
C-24.2, r. 36 - Special Road Train Operating Permits Regulation
Section 3.1
Disposition versions
3.1. In addition to the characteristics described in section 3, the road trains must have the following axle characteristics:
(1) the tractor has a single front axle and a tandem axle, interaxle spacing of not less than 3.5 m measured from the axis of rotation of the single axle to the axis of rotation of the first axle of the tandem axle, and a wheel base of 6.2 m or less measured from the axis of rotation of the single axle to the centre of the tandem axle;
(2) the first semi-trailer in a B train double has a tandem axle or a triple axle, and the first semi-trailer in an A or C train double has a tandem axle, a triple axle or a Class B.44 or B.45 four-axle group referred to in the Vehicle Load and Size Limits Regulation (chapter C-24.2, r. 31);
(3) the second semi-trailer is equipped with a tandem axle or a triple axle; and
(4) the interaxle spacing of the tandem axle or triple axle, measured between the axis of rotation of each axle, does not exceed 1.85 m.
3.1. In addition to the characteristics described in section 3, the road trains must have the following axle characteristics:
(1) the tractor has a single front axle and a tandem axle, interaxle spacing of not less than 3.5 m measured from the axis of rotation of the single axle to the axis of rotation of the first axle of the tandem axle, and a wheel base of 6.2 m or less measured from the axis of rotation of the single axle to the centre of the tandem axle;
(2) the first semi-trailer in a B train double has a tandem axle or a triple axle, and the first semi-trailer in an A or C train double has a tandem axle, a triple axle or a Class B.44 or B.45 four-axle group referred to in the Vehicle Load and Size Limits Regulation (chapter C-24.2, r. 31);
(3) the second semi-trailer is equipped with a tandem axle or a triple axle; and
(4) the interaxle spacing of the tandem axle or triple axle, measured between the axis of rotation of each axle, does not exceed 1.85 m.
Until 31 December 2009, the first semi-trailer in an A or C train double may, despite subparagraph 2, be equipped with any tandem or triple axle group on the condition that the semi-trailer was built before 1 March 1997, in which case subparagraph 4 of the first paragraph does not apply.
